CD74HC4067 16 Channel Analog & Digital MUX Breakout Board Multiplexer

Suits Raspberry Pi & Arduino

$7.75
QTY: 1 In Stock


Calculate Shipping



Toll DX Express - $5.00 (ETA: 1 days)
Fastest Delivery Method - Overnight
** Recommended **

eParcel Shipping - $6.95 (ETA: 1 days)
5-7 Business Days
Austpost Express Post - $8.95 (ETA: 1 days)
Average Delivery Time 2-3 biz days
Toll is faster than express post!

If you have a lot of digital or analog inputs to read, then this device is for you!
 

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins!

Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller’s TX line to 16 device’s RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc.

The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).

Features:

  • 2V to 6V operation
  • “On” resistance: 70 Ohms @ 4.5V
  • 6ns break-before-make @ 4.5V
  • Wide operating temperature range: -55C to 125C

Documents:

(IF_42D92726)

SKU IF_42D92726
Brand Logicware

Be The First To Review This Product!

Help other Logicware Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category