BEAGLEBONE BLACK REV C, CORTEX A8 1GHz CPU, 4GB Flash, 512 RAM

$97.95
QTY: 1 In Stock


Calculate Shipping



Toll DX Express - $0.00 (ETA: 1 days)
Fastest Delivery Method - Overnight
** Recommended **

eParcel Shipping - $6.95 (ETA: 1 days)
5-7 Business Days
Austpost Express Post - $8.95 (ETA: 1 days)
Average Delivery Time 2-3 biz days
Toll is faster than express post!

 
If you are looking for an IoT edge router, a lot of people are
utilising Beaglebone Black as their device of choice..
 
http://www.ieee.neu.edu/sites/default/files/beagleboneLogo.jpg

Beagle Bone Black Rev. C Development Platform
 

http://liliputing.com/wp-content/uploads/2014/04/BeagleBone-Black.jpg

The Beagle Bone Black (BBONE-BLACK-4G) is a low cost, high-expansion focused BeagleBoard using a low cost Sitara™ AM3358 ARM® Cortex™-A8 processor from Texas Instruments. BBONE-BLACK-4G ships with the Ångström Linux distribution preinstalled on the onboard FLASH, ready to start evaluation and development. Many other Linux distributions and operating systems are also supported by BeagleBone Black including Ubuntu, Android, and Fedora. Like its predecessors, the BeagleBone Black is designed to address the Open Source Community, early adopters, and anyone interested in a low cost ARM® Cortex™-A8 based processor. It has been equipped with a minimum set of features to allow the user to experience the power of the processor and also offers access to many of the interfaces and allows for the use of add-on boards called capes, to add many different combinations of features. A user may also develop their own board or add their own circuitry.

The BBONE-BLACK-4G features TI's Sitara™ AM3358AZCZ100 microprocessor, which is based on ARM®Cortex™-A8 core with enhanced image, graphics processing, peripherals and industrial interface options such as EtherCAT and PROFIBUS. The board is equipped with 256Mb x16 DDR3L 4Gb (512MB) SDRAM, 32KB EEPROM, and 4GB embedded MMC (eMMC) Flash as the default boot source. The board is also populated with a single microSD connector to act as a secondary boot source for the board and, if selected as such, can be the primary boot source. The BeagleBone Black supports four boot modes, including eMMC boot, microSD boot, serial boot, and USB boot. A switch is provided to allow switching between the modes.

http://robosavvy.com/store/images/beagleboneDesc.jpg

Features

  • Processor: TI Sitara AM3358AZCZ100, 1GHz, 2000 MIPS
  • 4GB 8-bit eMMC on-board flash storage (rev. C)
  • SDRAM: 512MB DDR3L 800MHZ
  • 3D graphics accelerator
  • NEON floating-point accelerator
  • 2x PRU 32-bit microcontrollers
  • USB host, Ethernet, HDMI
  • SD/MMC Connector for microSD
  • 2x 46 pin headers
  • Software: Debian, Angstrom, Ubuntu, Android

In contrast to the original BeagleBone, the BBONE-BLACK-4G has an onboard HDMI interface to connect directly to TVs and monitors. Other features include a 10/100 Ethernet interface, a serial debug port, a PC USB interface, an USB 2.0 host port, a reset button, a power button, and five indicating blue LEDs. The BeagleBone Black has the ability to accept up to four expansion boards or capes that can be stacked onto the expansion headers. The majority of capes designed for the original BeagleBone will work on the BeagleBone Black.

Board Specs:

Beagle Bone Black Rev C
AM3358 1GHz ARM® Cortex-A8 Processor
RAM: 512MB of DDR3L DRAM
4GB onboard flash memory
Onboard microHDMI port

http://beagleboard.org/static/images/beagle-home-event-tux.gif

Kit Includes: 
Assembled Board
Mini-B to Standard A USB Cable
Setup Guide

 

Documents:

(IF_8908D382)

SKU IF_8908D382
Brand Logicware

Be The First To Review This Product!

Help other Logicware Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category